iGo Starter Kit from iSmoka

Description:

The battery tube matches the BCC tank perfectly for a streamlined, classy appearance. The device itself is smaller in diameter than most mods, with a 2100mAh capacity battery. The lithium ion battery is replaceable when needed. Just replace the battery and keep on going.

iGo Starter Kit from iSmoka charges with the included USB cord. It is also a passthrough device, meaning that you can vape while it charges. There is no need to remove the battery to charge the iGo lie some other mod devices.

There are two voltage modes with the iGo kit. The iGo can either be set to a constant 3.3 volts, or it can be set to output at the true battery voltage (4.2v-3.3v) depending on the charge.

iGo Starter Kit from iSmoka includes:

  • 1 × BCC Mega bottom coil cartomizer
  • 3 × BCC Cartomizer coil heads
  • 3 × BCC Mega flat tip mouthpiece
  • 1 × Control head
  • 1 × iGo battery tube
  • 1 × Rechargeable 2100mAh battery (16650 li-ion)
  • 1 × iGo micro USB cable
  • 1 × iGo AC to USB wall adapter
  • 1 × iGo users manual

The iGo button color will change as the battery discharges, so you can easily tell how much battery life is left.

  • When the power is 50%, the LED displays white;
  • When the power is 10-50%, it display light blue;
  • When the power is less than 10%, it will be dark blue to warn that the battery need to be charged.
When the battery is fully charged, the charging will stop automatically. It usually takes 3 to 4 hours to fully charge.
                                                    
Short circuit protection:
  • Should an output short circuit happen, the protection device will disconnect the power supply automatically and the battery will be locked
  • The battery will be unlocked and continue to work when charged again
iGo Specs:
  • Color: Black
  • Diameter:19 mm
  • Length:113 mm
How to switch between constant voltage output mode 3.3v and inconstant voltage output mode 3.3-4.2v:
  • Click the button 5 times within 2 seconds to turn the battery off
  • Keep pressing the button for a few seconds until the button LED blink orange 3 times
  • Click the button 5 times within 2 seconds to turn the battery on
How to switch between inconstant voltage output mode 3.3-4.2v and constant voltage output mode 3.3v:
  • Click the button 5 times within 2 seconds to turn the battery off
  • Keep pressing the button for a few seconds until the button LED blinks blue 3 times
  • Click the button 5 times within 2 seconds to turn the battery on

Customer Reviews

Based on 5 reviews Write a review